Khetar ni farte fencing banavva ni navi yojna 2019
Khetar ni farte fencing banavva ni navi yojna 2019: More than 5% of the population pursuant to the Registration In respect of the applications of the group / beneficiaries or the group having area in it, Rs.1.5 / - per running meter or in the limit of 5% whichever is less, and Aj. Assistance will be available to the beneficiaries of the SC / ST without limitation of 2% and payable assistance in two phases - 1% in the first phase and the remaining 5% in the second phase. Only after receipt of the inspection report from the system will the payment be made to the account of the group leader appointed by the applicants of the cluster.
The principle of wire fences is that they are supported mainly by tension, being stretched between heavy strutted or guy-wired posts at ends, corners, and ideally at intervals in longer stretches (every 50 to 300 metres, 150 to 1000 feet). Between these braced posts are additional smaller wooden or metal posts which keep the wires spaced and upright, usually 3 to 6 metre (10 to 20 feet) apart, depending on the style of fencing used.
Traditionally, wire fencing material is made of galvanized mild steel, but galvanized high-tensile steel is now also used in many places. To prevent sagging of the fence, which raises the risk of entanglement or escape, the wire is tensioned as much as the material will safely allow during construction by various means, including a hand-operated "wire stretcher" or "fence stretcher" (called a "monkey strainer" in some areas) or other leverage devices, a winch, or even by carefully pulling with a tractor or other vehicle.
Wire fences are typically run on wooden posts, either from trees commercially grown in plantations or (particularly in the American West) cut from public lands. When less expensive or more readily available than wood, steel T-posts or star posts are used, usually alternating every 2 to 5 steel posts with a more stable wood post. Non-electrified wire is attached to wooden posts using fencing staples (for intermediate posts, these are fitted loosely, not gripping the wire). Non-electrified wire is held on T-posts by means of wire "clips" made of smooth galvanized wire that wrap around the back of the post and hook onto the wire on either side of the post.
The applicant should apply online on the i-Farmer Portal and submit his copy along with the necessary supporting evidence and submit it at the office of the concerned district corporation in Day-1. Review the guidelines involved with the application copy and contact the concerned district office if necessary.
Post a Comment